Installed in parks and backyards across the globe Installed in parks and backyards across the globe Rain Bird’s 1800 Series is the #1 selling commercial-grade pop-up sprinkler in the world. Chosen for its reliability heavy-duty materials and versatility the 1800 Series offers a broad selection of spray heads for watering shrubs small lawns.
I see a message on the DISPLAY “14NOMOD” what does it mean?
It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.
My Alert light is flashing, what does it mean?
It means that you have a programming error. Either there are: no start times, no run times, or no watering days selected. The controller ships from the factory with the following settings: My Alert light is illuminated and not flashing, what does it mean?1 Start time of 8:00 AM, 10 minute run time for the first 4 stations (base module) and all days set to ON.
It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)
How do I run a manual program?Rain Bird Esp-tm2 Wifi User Manual Pdf
Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR
A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.
How do I run a specific station?
Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.
What settings are reset if I do a factory reset?
Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.
What settings are not reset if I do a factory reset?
Date/Time is the only setting not reset to the factory ship settings.
I replaced my old ESPM with the new ESPME, can I reuse my 3 station module?
Yes, 3 station modules are compatible with the new ESPME.
Do I need to have a 9V battery installed to backup anything?
No. All Date/Time information is backed up internally on a long life lithium battery. Can the ESPME run more than 1 program at a time?The programs and settings are backed upon internal memory. So, no battery is required.
No.
I see a message on the DISPLAY “14NOMOD” what does it mean?
It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.
My Alert light is illuminated and not flashing, what does it mean?
It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)
How do I run a manual program?
Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR
A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.
How do I run a specific station?
Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.
Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.
What settings are not reset if I do a factory reset?
Date/Time is the only setting not reset to the factory ship settings.
I replaced my old ESPM with the new ESPME, can I reuse my 3 station module?
Yes, 3 station modules are compatible with the new ESPME.
Lomoinstant wide user manual download. Advanced Lens System: One built-in wide angle lens, plus additional Fisheye, Portrait and Close-Up lens attachments available. 3 Shooting Modes: Shoot photos with auto-flash on for immediate great results, or take direct control with the creative. Mar 08, 2016 There were only two focus settings which left a lot to be desired for versatility. The Wide 200 was an older model of the Instax Wide camera, but even the subsequent models weren’t really improvements over the 200. Now, what features did the Lomo Instant Wide. Choose Your Package. The Lomo’Instant Wide is available as part of two different packages: Lomo’Instant Wide Single Package — Includes the Lomo’Instant Wide camera plus the Remote Control Lens Cap. Lomo’Instant Wide Combo Package — Includes the Lomo’Instant Wide camera and the Remote Control Lens Cap, plus the Splitzer, Ultra-Wide-Angle Lens attachment. Lomo'Instant Wide. Combining high quality craftsmanship with versatile features, the Lomo’Instant Wide is the instant camera for any and every person who revels in capturing every beautiful, bizarre and bewildering moment in a creative and perfectly exposed way. Please, tick the box below to get your link: Get manual.
Can the ESPME run more than 1 program at a time?
No.
Do I need to have a 9V battery installed to backup anything?
No. All Date/Time information is backed up internally on a long life lithium battery. I see a message on the DISPLAY “14NOMOD” what does it mean?The programs and settings are backed upon internal memory. So, no battery is required.
It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.
My Alert light is illuminated and not flashing, what does it mean?
It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)
How do I run a manual program?
Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR
A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.
How do I run a specific station?
Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.
What settings are reset if I do a factory reset?
Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.
What settings are not reset if I do a factory reset?
Date/Time is the only setting not reset to the factory ship settings.
I replaced my old ESPM with the new ESPME, can I reuse my 3 station module?
Yes, 3 station modules are compatible with the new ESPME.
I see a message on the DISPLAY “14NOMOD” what does it mean?
It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.
My Alert light is illuminated and not flashing, what does it mean?
It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)
How do I run a manual program?
Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR
A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.
How do I run a specific station?
Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.
What settings are reset if I do a factory reset?
Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.
What settings are not reset if I do a factory reset?
Date/Time is the only setting not reset to the factory ship settings.
I replaced my old ESPM with the new ESPME, can I reuse my 3 station module?
Yes, 3 station modules are compatible with the new ESPME.
Can the ESPME run more than 1 program at a time?
No.
Do I need to have a 9V battery installed to backup anything?
No. All Date/Time information is backed up internally on a long life lithium battery. Can the ESPME run more than 1 program at a time?The programs and settings are backed upon internal memory. So, no battery is required.
No.
Do I need to have a 9V battery installed to backup anything?
No. All Date/Time information is backed up internally on a long life lithium battery. Can the ESPME run more than 1 program at a time?The programs and settings are backed upon internal memory. So, no battery is required.
No.
Do I need to have a 9V battery installed to backup anything?
No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required. Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |